Network-Related Switch Settings Of Module - Mitsubishi Electric MELSEC iQ-R Series Safety Manual

Network-related switch settings of module

Set network-related switches on modules as follows.
Safety CPU
There is no network-related switch.
Safety function module
There is no network-related switch.
CC-Link IE Field Network master/local module
There is no network-related switch.
Safety remote I/O module
Set the station number setting switches.
NZ2GFSS2-32D (1)
Switch number in the figure above
(1)
The setting value of the station number becomes valid when the module is powered on. Set the station
number when the system is powered off.
Standard remote I/O module
Set the station number setting switches.
Switch number in the figure above
(1)
The setting value of the station number becomes valid when the module is powered on. Set the station
number when the system is powered off.
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
52
5.1 System Configured by a Safety CPU
NZ2EXSS2-8TE
Remote I/O
Module number
Station number setting switch
(1)
Remote I/O
Module number
Station number setting switch
CCIEF remote (1)
SR_IO1
1
CCIEF remote (2)
R_IO2
2