Mitsubishi Electric MELSEC iQ-R Series Safety Manual page 166

■Basic settings
Set the network configuration settings and other parameters of the CC-Link IE Field Network master/local module. Display the
basic settings. Then, select and input parameters as shown below. Complete the input. Then, click the [Apply] button in the
lower right of the window. When setting "Network Configuration Settings", double-click the line of the network configuration
setting in the setting item window, or click the right-side button to be displayed when selecting the line.
Window
Displayed items
Setting classifications
Basic Settings Network Configuration Settings
Refresh Settings
Network Topology
Operation setting when the
master station is returned
(settable only when setting the
submaster station in a network
configuration)
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
164
5.2 System to Which Multiple Safety CPUs are Connected
CCIEF programmable
controller
Master (1-0)
Refer to Network Configuration
Settings.
Do not set.
Line topology, star topology, or both
are used
Return as Master Operation Station
CCIEF programmable CCIEF programmable
controller controller
Local (1-1) Local (1-2)
(Unavailable) (Unavailable)
Do not set. Do not set.
(Unavailable) (Unavailable)
(Unavailable) (Unavailable)