■Standard remote I/O module
Set the station number setting switches.
Switch number
Remote I/O
in the figure
Module number
above
(1)
Station number setting switch
The setting value of the station number becomes valid when the module is powered on. Set the station
number when the system is powered off.
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
144
5.2 System to Which Multiple Safety CPUs are Connected
(1)
CCIEF remote (2-2)
R_M2IO2
(Network number 2)
2
CCIEF remote (3-2)
R_M3IO2
(Network number 3)
2
CCIEF remote (4-2)
R_M4IO2
(Network number 4)
2