Mitsubishi Electric MELSEC iQ-R Series Safety Manual page 150

■Setting details of device/label memory areas
Open the detailed settings window from the [Detailed Setting] for the [Device Setting]. Then set the safety device points on the
following window. Set number of points so that the total of the points will not exceed the capacity of the device area. Set the
parameters. Then, click the [Apply] button in the lower right of the window.
For details on parameter setting method, refer to the following.
 GX Works3 Operating Manual
 MELSEC iQ-R CPU Module User's Manual (Application)
Window
Displayed items
Item
Safety Input (SA\X)
Safety Output (SA\Y)
Safety Internal Relay (SA\M)
Safety Link Relay (SA\B)
Safety Timer (SA\T)
Safety Retentive Timer (SA\ST)
Safety Counter (SA\C)
Safety Data Register (SA\D)
Safety Link Register (SA\W)
*1 When selecting 12K points, check the versions of the CPU module and the engineering tool. ( MELSEC iQ-R CPU Module User's
Manual (Application))
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
148
5.2 System to Which Multiple Safety CPUs are Connected
Setting (default)
8K points (either 8K or 12K points can be selected.)
8K points (either 8K or 12K points can be selected.)
6K points
4K points
512 points
0 point
512 points
12K points
4K points
*1
*1