Mitsubishi Electric MELSEC iQ-R Series Safety Manual page 155

• Network configuration settings
Set the number of link device points and assignment of slave stations to the master station.
Operating procedure
1.
Select a module from "Module List", and drag and drop it to the list of stations or the network map.
2.
Select and input parameters as shown below.
3.
Select [Close with Reflecting the Setting] and complete "Network Configuration Settings". If the window is closed using
the [] button, the settings are not reflected.
Window
List of
stations
Network map
Drag and drop a module.
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
5.2 System to Which Multiple Safety CPUs are Connected
5
153