Mitsubishi Electric MELSEC iQ-R Series Safety Manual page 153

Communications between Safety CPU and safety and standard remote I/O module
This section describes network parameters setting required for communications between Safety CPU and safety remote I/O
module and standard remote I/O module.
■Required Settings
Set the station type, network number, and parameters of the CC-Link IE Field Network master/local module. Display the
required settings. Then, select and input parameters as shown below. Complete the input. Then, click the [Apply] button in the
lower right of the window.
Window
Displayed items
Setting classifications
Required Station Type
Settings
Network Number
Setting Method
Station number setting
Parameter Setting
Method
*1 Station number setting method and parameter setting can be selected by setting "Parameter Editor" and "Program". Here, set the
"Parameter Editor".
Safety programmable
controller (1)
CCIEF master (2-0)
Master Station
2
*1
Set parameters
0
*1
Set parameters
Safety programmable
controller (2)
CCIEF master (3-0)
Master Station
3
*1
Set parameters
0
*1
Set parameters
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
5.2 System to Which Multiple Safety CPUs are Connected
Safety programmable
controller (3)
CCIEF master (4-0)
Master Station
4
*1
Set parameters
0
*1
Set parameters
151
5