Mitsubishi Electric MELSEC iQ-R Series Safety Manual page 100

■Timing chart
Reset switch (X100)
Restart status (SA\D0.0)
Restart status (SA\D0.1)
Start switch (X101)
Start status (SA\D1.0)
Start status (SA\D1.1)
Interlock status (SA\SD1232.0)
Interlock release (SA\SD1240.0)
CC-Link IE Field Network status
(SA\SD1008.0)
Light curtain (SA\X4)
Laser scanner (SA\X6)
Safety information (SA\M5)
Electromagnetic contactor output
(SA\Y0)
Electromagnetic contactor output
(SA\Y1)
Electromagnetic contactor output
check (SA\X2)
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
98
5.1 System Configured by a Safety CPU
Entry Exit
detected confirmed
Reset switch Start switch Reset switch
pressed pressed pressed
CC-Link IE Field
Network error
The light is
blocked.
The laser light
is blocked.
CCIEF remote (1)
error
Start switch Reset switch Reset switch
pressed pressed pressed
Entry Relay contact
detected welding detected
Start switch Reset switch
pressed pressed
Welding of a relay
contact is detected.