Mitsubishi Electric MELSEC iQ-R Series Safety Manual page 85

■Timing chart
Reset switch
pressed
Reset switch (X100)
Restart status (SA\D0.0)
Restart status (SA\D0.1)
Start switch (X101)
Start status (SA\D1.0)
Start status (SA\D1.1)
Interlock status
(SA\SD1232.0)
Interlock release
(SA\SD1240.0)
CC-Link IE Field Network
status (SA\SD1008.0)
Emergency stop switch
(SA\X0)
Safety information (SA\M5)
Safety relay output (SA\Y0)
Safety relay output (SA\Y1)
Safety relay output check
(SA\X2)
CCIEF
Emergency stop
remote (1) error
switch pressed
Start switch Reset switch Start switch
pressed pressed pressed
The switch
turns off.
CC-Link IE
Field Network
error
Emergency stop
switch pressed
Reset switch Reset switch Start switch
pressed pressed pressed
Welding of
a relay contact
is detected.
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
5.1 System Configured by a Safety CPU
Relay contact
welding detected
Reset switch
pressed
83
5