Mitsubishi Electric MELSEC iQ-R Series Safety Manual page 156

Displayed items
Item Description
Assignment Number of points or Start number
Method
Total number of 2
slave stations
Item
Model
STA#
Station Type
RX/RY
RWr/RWw
Reserved/Error Invalid
Station
Network synchronous
communication
Station Alias
information
Comment
*1 Network number 2, 3, or 4 is placed to A.
Set slave station parameters refer to the following. Before setting parameters, complete the required settings and the network
configuration settings under the basic settings. Write the parameters to the Safety CPU and restart it. Then, set the slave
station parameters.
Operating procedure
1.
On the list of stations or the network map, right-click the slave station to be set.
2.
[Online]  Click [Parameter Processing of Slave Station].
3.
On the "Parameter Processing of Slave Station" window, select "Parameter write" for the method selection. Enter
parameters in the "Write Value" column.
4.
Click the [Execute] button and write the parameters.
For detailed parameter values, see explanations for standard input setting and specific cases.
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
154
5.2 System to Which Multiple Safety CPUs are Connected
Range/value
*1
CCIEF master (A-0)
RJ71GF11-T2
0
Master Station
(Unavailable)
(Unavailable)
No Setting
Asynchronous
(Blank)
(Blank)
*1
CCIEF remote (A-1)
NZ2GFSS2-32D
1
Remote device station
Points: 80
Start: 0000
End: 004F
Points: 16
Start: 0000
End: 000F
No Setting
Asynchronous
(Blank)
(Blank)
NZ2EXSS2-8TE
(Unavailable)
(Unavailable)
(Unavailable)
(Unavailable)
(Unavailable)
Asynchronous
(Blank)
(Blank)
*1
CCIEF remote (A-2)
NZ2GF2B1-16D
2
Remote device station
Points: 16
Start: 0050
End: 005F
Points: 20
Start: 0010
End: 0023
No Setting
Asynchronous
(Blank)
(Blank)