Mitsubishi Electric MELSEC iQ-R Series Safety Manual page 168

Item
Station Alias
information
Comment
■Application settings
Set the supplementary cyclic settings, safety communication settings, and other parameters of the CC-Link IE Field Network
master/local module. Display the application settings. Then, select and input parameters as shown below. Complete the input.
Then, click the [Apply] button in the lower right of the window. When setting "Safety Function Setting", double-click a line of
the safety function setting in item window, or click right-side button to be displayed when selecting line.
Window
Displayed items
Setting Module
classificatio
ns
Application Supplementary Cyclic
Settings Settings
Interrupt settings
IP Address
Communication mode
Parameter name
Dynamic Routing
Event reception from other
stations
Module operation mode
Interlink transmission
settings
Setting of safety
communication use or not
Safety Communication
Setting
5 SAFETY APPLICATION CONFIGURATION EXAMPLES
166
5.2 System to Which Multiple Safety CPUs are Connected
Range/value
CCIEF programmable controller
Master (1-0)
(Blank)
(Blank)
CCIEF programmable
controller
Master (1-0)
Refer to Supplementary Cyclic
Settings.
Do not set.
Do not set.
Normal
(Blank)
Enable
Enable
Online
Do not set.
Use
Refer to Safety Communication
Setting.
CCIEF programmable controller
Local (1-1)
(Blank)
(Blank)
CCIEF programmable
controller
Local (1-1)
Refer to Supplementary Cyclic
Settings.
Do not set.
(Unavailable)
(Unavailable)
(Blank)
Enable
Enable
Online
(Unavailable)
Use
Refer to Safety Communication
Setting.
CCIEF programmable controller
Local (1-2)
(Blank)
(Blank)
CCIEF programmable
controller
Local (1-2)
Refer to Supplementary Cyclic
Settings.
Do not set.
(Unavailable)
(Unavailable)
(Blank)
Enable
Enable
Online
(Unavailable)
Use
Refer to Safety Communication
Setting.