Local Network Connection (Optional) - Agilent Technologies 3100 OFFGEL Fractionator User Manual

8 At the item Local Area Connection click with the right mouse button onto
9 Within the Properties select Internet Protocol Version 4.
10 Select Use the following IP address.
11 Enter the following information:
12 Select Ok to finish.
13 Close remaining windows.
You may now proceed switching on the Agilent 3100 OFFGEL Fractionator
and open the Internet Explorer on the control PC. Type the IP address
192.168.254.11 to view the web based user interface. See
Interface," starting on page 40 for the description of the interface.
A short description on how to set up the instrument and computer is given in a Quick Guide
N O T E
(G3100-90111) shipped with the instrument.
Do connect the PC only to the 3100 OFFGEL fractionator. Connecting the PC with this
N O T E
manually set IP address to your local area network will most likely create network issues.

Local Network Connection (optional)

For connecting the 3100 OFFGEL fractionator to a local network request a
static IP address, subnet mask and gateway adress from your network
administrator.
Although it is intended to use the 3100 OFFGEL fractionator in a local
network at a later point in time you have to access the instrument first with
the default IP address (192.168.254.11). The steps for this are given under
"Assignment of an IP Address to the Control Computer"
"Setting up the Agilent 3100 OFFGEL Fractionator"
When a local LAN connection via Cross-Over LAN cable between control PC
and 3100 OFFGEL fractionator is established you can set the provided values
for static IP address, subnet mask and gateway address under Config of the
OFFGEL User Manual
Properties.
• IP Adress: 192.168.254.10
• Subnet Mask: 255.255.255.0
Installation
Setting up the Control PC
Chapter 5, "The User
on page 36 and
on page 34.
4
37