Table of Contents
Advertisement
6
Maintenance
Firmware Update
3 Select the Add Instrument button.
Figure 31
4 Enter a name for the system (e.g. System 1)
5 Enter the TCP/IP address information in the instrument address field, e.g.
Figure 32
82
Select the Add Instrument button.
168.192.254.11 for the default address of the instrument.
•
Set here the static IP address of your instrument in case you connected it
to a network.
•
In case you connect alternatively with RS232 cable enter the valid COM
port connection information in the instrument address field, e.g. COM1.
Add instrument screen
OFFGEL User Manual
Advertisement
Table of Contents
Troubleshooting
