Table of Contents
Advertisement
Maintenance
6
Firmware Update
If you cancel an update, the module remains in the current mode, resident or main,
N O T E
depending when the process was stopped. It cannot be used until the update process has
been restarted.
At the end of the update, a report is shown. The update status is either PASS
(successful) or FAILED (not successful), see
Figure
40. If the update failed, the
Protocol file contains more information, see
"The Log-file"
on page 87.
Figure 40
Report Screen
7 If desired, open and print the Protocol file.
8 Press OK to continue.
9 Perform a power cycle of the instrument.
The Log-file
This file is the verification that the firmware update was completed
successfully or, in the case of problems, the log-file may give some specific
information.
Press the button Open Protocol File to open the report. Information can be
copied/pasted into an e-mail for further help from Agilent support.
OFFGEL User Manual
87
Advertisement
Table of Contents
Troubleshooting
