Table of Contents
Advertisement
Displaying Data Graphically
The plot tab
Hours, Voltage Limit, Current Limit and Current per lane. The signals are
available from the Signal Selection Menu. The scaling source of the Y-Axis is
selectable by clicking onto the data series in the Graph area or reselecting it
from the menu. The view area can be zoomed by clicking to the graph area of
interest and using the mouse wheel. Clicking into the graph area and dragging
allows moving the zoomed area to another section. Unzoom is available under
Display Options. A stacked and overlay view onto the signal is possible as well
as a switch between Tray I and Tray II.
Figure 15
Plot of Signals
OFFGEL User Manual
(Figure
15) allows viewing up to 4 signals which can be Volt, Volt
Operation
Displaying Data Graphically
1 Signal selection
2 Current Y-Axis
3 Signal/Units Y-Axis
4 Graph area
5 Display options
5
49
Advertisement
Table of Contents
Troubleshooting
