Agilent Technologies 3100 OFFGEL Fractionator User Manual page 38

4 Installation
Setting up the Control PC
web-based User Interface. Please see the description of the web-based User
Interface in
addition information on the Instrument Configuration on
After you have set the custom IP address, subnet mask and gateway address,
do the following steps:
1 Power the instrument off.
2 Install a conventional LAN cable from the instrument to your local network.
3 Reconfigure the instrument to use the customer set IP address by changing
4 Power the instrument on again.
The instrument will be accessible now through your local network by typing
the IP address into the address line of you browser.
Note down the initial Network configuration of the PC for your own reference.
N O T E
Since the instrument is not enabled for DHCP the assigned custom IP address must be a
N O T E
static IP address.
38
Chapter 5,
the configuration dip-switches
Put switch 7 up and all other configuration dip-switches down.
"The User Interface"
(Figure 7
starting on page 40
page 62.
on page 34).
OFFGEL User Manual
and find