How To Display Exported Results - Agilent Technologies 3100 OFFGEL Fractionator User Manual

5 Operation
Reviewing Result Files

How to Display Exported Results

The results of all run parameters can be exported as comma separated value
(.csv) file and thus can be visualized with Microsoft Excel. Agilent
Technologies has designed the Agilent 3100 OFFGEL fractionator plotter
which is an Excel add-on and facilitates the analysis of the run parameters.
The tool is downloadable from the instrument in revisions for Microsoft Excel
2003 and 2007. The tool is also provided via the Agilent Technologies web page
http://www.agilent.com
Technical Support - Downloads & Utilities) or direct via
http://www.chem.agilent.com/scripts/DownloadsUtilities.asp
downloaded free of charge.
Note that the tool was designed for Microsoft Excel 2003 and 2007 with US-American
N O T E
system local settings only and has not been tested with other versions of Microsoft Excel.
However, it is expected that the tool also runs under international versions and
international system local settings.
1 In Microsoft Excel 2003, open the downloaded file Agilent 3100 OFFGEL
2 Click Enable Macros when the security warning window pops up.
If you cannot run the program, check that Excel security settings under
N O T E
tools>macro>security allow macros to be run.
The following button is generated in your Microsoft Excel 2003 tool bar or is
available under Add-Ins/Custom Toolbars for Microsoft Excel 2007:
Figure 19
58
Fractionator.xla. You may also want to copy the file in the XLSTART folder
(for office 2003 it can be C:\Program Files\Microsoft Office\OFFICE11\
XLSTART) so that the program is loaded automatically when Excel is
started.
Agilent 3100 OFFGEL Fractionator toolbar button.
(Life Sciences and Chemical Analysis Solutions -
and can be
OFFGEL User Manual