Table of Contents
Advertisement
5
Operation
Starting a Run
Starting a Run
1 To start the fractionation, make sure you have configured the cooling
2 From the Status screen of the connected instrument select the Method in
3 Press the Start button to start the fractionation.
You will be able to monitor the voltage applied and the current flowing through the
N O T E
individual lanes from the status page. It is recommended to monitor the startup phase in
order to correct for example for missing connectivity.
You can protect the instrument from an unwanted access of a third user by the lock
function (see Instrument lock on
A blue light below the anode connector of the respective tray indicates that the instrument
N O T E
is running. A blinking blue light indicates that the fractionation is finished.
Both trays can be used independently. If the top cover is opened, the fractionation pauses
until the top cover is closed again.
4 Upon finished fractionation you can stop the run and retrieve the fractions.
68
platform according to your needs. For details, refer to
Functions"
on page 42.
the drop down menu of the tray you will use. The run parameters of the
loaded method are visible on status screen.
page
45).
"General
OFFGEL User Manual
Advertisement
Table of Contents
Troubleshooting
