Chapter 3 Operation Preparations; Connecting The Patient Cable To The Electrocardiograph And Electrodes; Connecting The Patient Cable To The Electrocardiograph - EDAN SE-601 Series User Manual

SE-601 Series Electrocardiograph User Manual

Chapter 3 Operation Preparations

Before use, the equipment, patient cable and electrodes should be checked. Replace
them if there is any evident defectiveness or aging which may impair the safety or the
performance, and make sure that the equipment is in proper working condition.

3.1 Connecting the Patient Cable to the Electrocardiograph

and Electrodes
The performance and electric shock protection can be guaranteed only if the original
patient cable and electrodes of the manufacturer are used.
The patient cable includes the main cable and lead wires which can be connected to electrodes.
3.1.1 Connecting the Patient Cable to the Electrocardiograph
Connect the patient cable to the patient cable socket on the right side of the main unit, and then
secure them with two screws.
WARNING
WARNING
- 18 -
Operation Preparations