GE Medical Systems Solar 9500 Service Manual page 80

4-28
Software Configuration: Creating a Custom Layout
Message Window – Allows you to create and configure a Message
window.
After you've created the message window, touch or click inside it to open
the Message Options window.
To define the message type, select Message Selection. This opens the
Message Type Selection window. This window offers choices of Window
Type (choose from Alarm State or Scrolling Msgs) or Close. After defining
the message type, select Background to define the background color for
the message window, or select Delete to delete this message window from
the display. Select Close to close this window.
Create Sub-group – Allows you to create a subgroup, or collection of
windows, for configuring your display. Subgroups are usually made of
commonly-used sets of parameter windows, waveform windows,
command buttons, and message windows. These subgroups can be saved
and retrieved for ease of customizing.
After you've created a subgroup, touch or click inside it to open the Sub-
group options. Sub-group options include the following:
Save Sub-group — allows you to name and save the subgroup for
retrieval at a later time.
127(
Bed layout names may contain alphanumeric characters 0 – 9, A – Z,
a space, a dash, and an underscore only.
If unacceptable characters are entered, a tone will sound.
Command Button — allows you to create and configure a command
button within the sub-group.
Waveform Window — allows you to create and configure a waveform
window within the sub-group.
Parameter Window — allows you to create and configure a
parameter window within the sub-group.
Message Window — allows you to create and configure a message
window within the sub-group.
Procedure timer — allows you to create a procedure timer within the
sub-group.
Background — opens the Background color selection window,
allowing you to set the background color of the subgroup.
Delete — allows you to delete the sub-group.
Retrieve Sub-group – Allows you to retrieve a previously saved
subgroup by bringing up the "Select Layout Configuration" window.
Choose the desired sub-group from the list and select OK.
Procedure timer – Allows you to open a timer window. After you've
created the timer, touch or click inside it to open the Timer options.
Select Delete to remove the timer window.
Background – Allows you to open the Background color selection
window, where you can set the background color for the bed.
Solar 9500 Information Monitor
2001085-061
Revision A