Layout Controls - GE Medical Systems Solar 9500 Service Manual

Layout Controls

Allow Configuration
Disable Configuration
Delete Layouts
Revision A
Software Configuration: Monitor Service Menu
127(
Configuration editing is an optional software package. If your Solar
9500 is not enabled for configuration editing, the Layout Controls
will be inactive.
Configuration editing allows you to create, modify, and save screen
layouts. Configuration editing uses a number of windows to help you
design your screen. These windows are combined and layered to
maximize functionality and to permit you to configure the Solar 9500
according to your personal preference.
Configuration editing functions are addressed in greater detail later in
this chapter.
Select Allow Configuration and the words Configuration ON display in
red at the top of the primary display to show that configuration editing is
enabled.
When you are finished with configuration editing, turn configuration
editing off. Configuration editing can be disabled from the service menu
by selecting Disable Configuration or from the Setups menu by selecting
Turn layout configuration off.
A layout is the base layer or background canvas of the screen layout
(including Parameter blocks, buttons and waveform windows). Selecting
Delete Layout opens a display that allows you to choose which layouts to
remove.
127(
Currently active layouts, layouts listed in the Layout Setup menu,
and GE clinical layouts cannot be deleted.
Solar 9500 Information Monitor
2001085-061
4-3