GE Medical Systems Solar 9500 Service Manual page 57

Software Configuration: Monitor Service Menu
Display Setup shown is for a system with 3 displays.
033B
Primary
The primary display is the first in a series of monitors or the sole monitor
connected to the Solar 9500 processing unit. It is distinguished from the
other monitors by the eight control buttons displayed at the bottom of the
screen. Real Time data (parameter waveforms and numerics) and/or
Non-Real Time data (a display with trends, alarm history, etc.) display
on he screen.
Secondary
A secondary display has touchscreen capabilities and displays Real Time
and/or Non-Real Time data on a two or three display system.
Remote 1, 2
A remote display is a view only monitor and not intended to be used as a
touchscreen display. Only Real Time data displays. Up to two remote
displays can be connected to the Solar 9500 processing unit.
127(
You cannot assign Non-Real Time applications to a remote display.
Unused
The display is not configured for use.
Revision A Solar 9500 Information Monitor 4-5
2001085-061