Processing Unit/Rams Interconnection - GE Medical Systems Solar 9500 Service Manual

Processing Unit/RAMS Interconnection

Revision A
Installation: Acquisition Interfaces
Before connecting the RAMS to the Solar 9500 processing unit you must
first configure the serial channel of the processing unit via the Serial
Interface Controls in the Service Menu. See chapter 4, Serial Interface
Controls for details. The RAMS interfaces with a Solar 9500 via the
RAMS RS-232 connection to the Solar processing unit with an interface
cable (pn 414803-003) as shown below.
Solar 9500 Information Monitor
2001085-061
021A
3-15