Acquisition Interfaces; Tram-Rac Housing - GE Medical Systems Solar 9500 Service Manual

Acquisition Interfaces

Tram-rac Housing

3-10
Installation: Acquisition Interfaces
Local bed acquisition comes from three possible sources:
a Unity Network ID connectivity device
a Tram and single parameter modules in one or two Tram-rac
housings via the Tram-net interface, and
the RAMS (Random Access Mass Spectrometer) via an RS-232
interface.
The Tram-net interface is a GE proprietary network used for
communications between a bedside monitor and the Tram-rac(s).
The Tram-rac housing (remote acquisition case) acquires patient data for
the Solar 9500 Information Monitor System. The Tram-rac Housing
Service Manual has more information. There are two Tram-rac housings
available for the monitor:
Tram-rac 2 housing, which holds a single Tram module, and
Tram-rac 4A housing, which can hold a Tram module, a SAM
module, and/or additional single parameter modules.
127(
The Solar 9500 is NOT compatible with the RAC 2A housing.
Shown below is a Tram-rac 4A housing with a Tram module and two
single parameter modules inserted.
Solar 9500 Information Monitor
2001085-061
014A
Revision A