Audio
Diagnostic Messages
Revision A
Software Configuration: Monitor Service Menu
Select Test Audio... to open a window with a slider bar to adjust the test
audio volume from 0 to 100% and two buttons, Play Tone and Close.
To test the audio subsystem do the following:
1. Move the slider to desired volume level.
2. Select Play Tone for a tone.
3. Select Stop Tone to turn tone off.
4. Select Close to end test and close the window.
Under Diagnostic Messages you can display and print all system and
Tram Log Files. See chapter 7, Troubleshooting for more information.
Solar 9500 Information Monitor
2001085-061
049A
4-21