Advanced Entry Calibration - Datamax ?-class series Maintenance Manual

2.2.2.3

Advanced Entry Calibration

Advanced Entry Calibration is an alternate calibration method for special-case media types only. This
procedure has two parts: (1) recording sensor readings using differing algorithms and, (2) selecting, re-
sampling, and manually entering calibration values.
Advanced Entry Calibration will override all previous calibration settings; use this method only when
Standard Calibration has failed.
Make sure media is loaded and that the appropriate Sensor Type has been selected, then perform the
Advanced Entry Calibration as follows:
Step Action
!
Turn 'On' the printer.
1
2 Press the Key.
Raise the printhead
assembly.
3 Press the
enter the Media Settings
menu.
4 Press the
scroll to '
SENSOR
'.
CALIBRATION
5 Press the
6 Press the
scroll to '
ADVANCED
'.
ENTRY
7 Press the
Adjustments and Maintenance
Displayed Message
!
!!
VODBMJCSBUFE
!
!
NFOV!NPEF!
NFEJB!TFUUJOHT!
!
!
!
Key to
NFEJB!TFUUJOHT!
NFEJB!UZQF
!
!
!
Key and
NFEJB!TFUUJOHT!
TFOTPS!DBMJCSBUJPO
!
!
!
Key.
TFOTPS!DBMJCSBUJPO!
QFSGPSN!DBMJCSBUJPO!
!
!
Key to
TFOTPS!DBMJCSBUJPO!
BEWBODFE!FOUSZ
!
!
Key.
BEWBODFE!FOUSZ!
TFOTPS!MFWFMT
!!
Wait until the printer initializes
!
(about six seconds).
You are entering Menu Mode.
!!
See the Operator's Manual for the
!
menu layout.
Press the
!
this procedure.
You are entering the calibration
submenu.
You are entering Advanced Entry
!
Calibration.
Press the
!
this procedure.
2-13
Comment
Key to abort
Key to abort