Introduction; Side Covers; Plastic Covers - Datamax ?-class series Maintenance Manual

4.0 Introduction

This section details removal and replacement procedures for the various printer parts.
Wear a wrist strap and follow standard ESD prevention measures.
Use extreme care when near the printhead; never use a sharp object on the surface.
CAUTION
Never use a sharp object on the platen roller.

4.1 Side Covers

4.1.1

Plastic Covers

Removal:
1. Turn 'Off' and unplug the printer.
2. On the rear of the printer, remove the two Screws securing the cover.
Removal and Replacement
Screws
4-1