Table of Contents
Advertisement
3. Open the cover; move the cover to the rear of the printer, as shown. Be sure the Slide on the cover is
clear of the Catch on the frame of the printer.
Catch
4. Lift the cover up and off the printer.
Installation:
1. Position the Cover onto the printer and move the cover forward until the Slide on the cover engages
the Catch on the printer frame (see Step 2, above).
2. Re-install the two previously removed screws on the rear of the printer.
Removal and Replacement
Slide
4-2
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the ?-class series and is the answer not in the manual?
Questions and answers