Datamax ?-class series Maintenance Manual page 49

Displayed Message
!
!
TUSPCF!UJNJOH!GBVMU!
!
!
UFNQFSBUVSF!GBVMU!
Troubleshooting
Fault Messages (continued)
Description
A printhead strobe
problem has been
detected.
The temperature range of
the printhead has been
exceeded, resulting in a
print shutdown.
3-9
Possible Solution(s)
1) Try cycling the printer power 'Off' and
'On' to clear the fault.
2) Replace the main logic board; see
Section 4.4.
Allow the printhead to cool. Ensure that
the printer has been installed under
acceptable environmental conditions; see
the Operator's Manual for details.