Ribbon Hubs; Take-Up Hub - Datamax ?-class series Maintenance Manual

4.9 Ribbon Hubs

4.9.1

Take-up Hub

Removal:
1. Turn 'Off' and unplug the printer.
2. Remove the three Screws securing the Thermal Transfer Assembly to the printer.
3. Remove the Thermal Transfer Assembly.
Screws
4. Remove the C-clip and Outer Bearing from the Thermal Transfer Assembly.
5. Slide the Take-up Hub and Inner Bearing out, and remove the Clutch Assembly from Thermal
Transfer Assembly.
Removal and Replacement
Centerplate
Take-up
Hub
Inner
Bearing
Thermal
Transfer
Assembly
Clutch
Assembly
4-23
Thermal Transfer Assembly
Outer
Bearing
C-Clip