Media Sensor - Datamax ?-class series Maintenance Manual

4.6

Media Sensor

Removal:
1. Turn 'Off' and unplug the printer.
2. Remove the side covers (see Section 4.0).
3. On the bottom right corner of the Main PCB, open the Strain Relief and remove the Media Sensor
Cable from its connector.
4. Remove the Screw and Outer Bearing Plate from the printer.
5. Slide the Media Sensor & Cable Assembly out of the printer.
Removal and Replacement
Media Sensor &
Cable Assembly
Outer Bearing
Plate
Screw
4-14