Table of Contents
Advertisement
Service and Maintenance Information
Regularly clean and maintain the system for optimal performance. For information on tuning
frequency, refer to
Table
source Operator Guide.
WARNING! Potential Radiation Hazard, Biohazard, or Toxic Chemical
Hazard: Determine whether instrument decontamination is required prior
to cleaning. Decontamination should be conducted prior to cleaning if
radioactive materials, biological agents, or toxic chemicals have been
used with an instrument.
Table 13-1
provides a recommended schedule for cleaning and maintaining the system. Contact
a Qualified Maintenance Person (QMP) to order consumable parts. Contact an AB SCIEX
representative for maintenance service and support.
Table 13-1 Maintenance Tasks
Component
Frequency
Curtain plate
Daily
Orifice plate
Daily
(front)
Orifice plate
As needed
(front and rear)
®
QJet
ion guide
As needed
Q0 and IQ1 lens As needed
Instrument
As needed
surfaces
Drain bottle
As needed
Roughing pump
As needed
oil
Instrument air
Every 6
filter
months
Roughing pumps
Leybold
oil
Sogevac
SV28: Every 6
months
Varian MS 40:
Annually
Electrode
As needed
Corona
As needed
discharge needle
System User Guide
RUO-IDV-05-0264-A
B-1. For information on maintaining the ion source, refer to the ion
Task
Clean
Clean
Clean
Clean
Clean
Clean
Empty
Check and fill
Inspect and
clean or replace
Replace
Inspect and
clean or replace
Replace
For more information...
Refer to
Clean the Curtain Plate on
page
124.
Refer to
Clean the Front of the Orifice
Plate on page
124.
Contact the local QMP or AB SCIEX Field
Service Employee (FSE).
Contact the local QMP or FSE.
Contact the local QMP or FSE.
Refer to
Clean the Surfaces on page 120
Refer to
Empty the Source Exhaust Drain
Bottle on page 125
Contact the local QMP or FSE.
Contact the local QMP or FSE.
Contact the local QMP or FSE.
Turbo V ™ Ion Source Operator Guide.
Turbo V™ Ion Source Operator Guide.
13
4500 Series of Instruments
119 of 138
Hide quick links:
Advertisement
Table of Contents
