AB Sciex QTRAP 4500 LC/MS/MS system System User's Manual page 100

Operating Instructions — Analyze and Process Quantitative Data
standard (for example, 10 is ±10%) in the same row as the corresponding
concentration. If the concentrations were not specified during acquisition, they are
not shown here. In that case, type them in the Concentration column.
9. Click Next.
Figure 11-3 Create Quantitation Set - Select Method Page
10. Select or create a method.
11. Click Finish.
The query is applied as a standard query. The query results are shown as a Pass or
Fail entry in the Standard Query Status column of the Results Table.
Tip!
4500 Series of Instruments
100 of 138
To return to the full view, right-click and then click Full.
System User Guide
RUO-IDV-05-0264-A