International
•
Electromagnetic Compatibility—IEC 61326-1, IEC CISPR 11 Class A
•
Safety—IEC 61010-1, IEC 61010-2-061
For more information, refer to the Declaration of Conformity included with the system.
Electrical Precautions
AC Mains Supply
WARNING! Electrical Shock Hazard: Use only qualified personnel for the
installation of all electrical supplies and fixtures, and make sure that all
installations adhere to local regulations.
Caution: Potential System Damage: Do not unpack or connect any components. The
Field Service Employee (FSE) will unpack, connect, and configure the system for the
proper operating voltage.
For information on system electrical specifications, refer to the Site Planning Guide.
Protective Earth Conductor
The mains supply must include a correctly installed protective earth conductor that must be
installed or checked by a qualified electrician before connecting the mass spectrometer. The
mass spectrometer must be positioned to permit access to the mains supply connector to
disconnect the device.
WARNING! Electrical Shock Hazard: Do not intentionally interrupt the protective
earth conductor. Any interruption of the protective earth conductor is likely to
make the installation dangerous.
Chemical Precautions
•
Determine which chemicals may have been used in the system prior to service and
regular maintenance. Refer to Safety Data Sheets for the health and safety
precautions that must be followed with chemicals.
•
Work in a well-ventilated area.
•
Always wear assigned personal protective equipment, including powder-free nitrile
gloves, safety glasses and a laboratory coat.
•
Follow required electrical safe work practices.
•
Avoid ignition sources when working with flammable materials, such as isopropanol,
methanol, and other flammable solvents.
System User Guide
RUO-IDV-05-0264-A
Operational Precautions and Limitations
4500 Series of Instruments
11 of 138