Overlay Calibration Curves; Calibration Curve Right-Click Menu - AB Sciex QTRAP 4500 LC/MS/MS system System User's Manual

Overlay Calibration Curves

Note: To examine the curve for one table more closely, right-click the curve and click
Active Plot. Select the curve to be plotted on top.
1. With two or more open Results Tables, view a calibration curve for one of the tables.
2. Right-click the calibration curve and then click Overlay.
Figure 11-12 Overlay Dialog
3. Select the tables to overlay with the current curve.
4. Click OK.
The software plots the curves for all selected tables on the same graph.

Calibration Curve Right-Click Menu

Right-click in the Calibration window or pane table to access the following options.
Figure 11-13 Calibration Curve Right-Click Menu
System User Guide
RUO-IDV-05-0264-A
Operating Instructions — Analyze and Process Quantitative Data
4500 Series of Instruments
109 of 138