Show Adc Data - AB Sciex QTRAP 4500 LC/MS/MS system System User's Manual

Operating Instructions — Analyze and Process Data
Table 10-3 Right-Click Menu for the Chromatographic Peak List Tab
Menu
Analyst Classic
Parameters
IntelliQuan Parameters
Save As Text
Delete Pane

Show ADC Data

ADC (analog-to-digital converter) data is acquired from a secondary detector (for example from a
UV detector through an ADC card), and is useful for comparison with mass spectrometer data. To
make ADC data available, acquire the data and the mass spectrometer data simultaneously and
save it in the same file.
Prerequisite Procedure
• Open Data Files on page
Tip! To see an example ADC data file, make sure that the Example project is
selected. Open the Devices folder, and then open the Adc16chan.wiff file.
1. Click Explore > Show > Show ADC Data.
The Select ADC Channel dialog opens.
Figure 10-2 Select ADC Channel Dialog
2. In the Channel list, select a channel.
3. Click OK.
The ADC data opens in a new pane below the active pane.
4500 Series of Instruments
80 of 138
Function
Opens the Analyst Classic dialog.
Opens the Intelliquan dialog.
Saves the data as text file.
Deletes the pane.
77. Open a data file containing ADC data.
System User Guide
RUO-IDV-05-0264-A