Table of Contents
Advertisement
Operating Instructions — Hardware
Item Description
2
3
3. Turn the side screws to secure the syringe.
Figure 4-3
4. On the mass spectrometer, press the button on the right side of the syringe pump to
start the flow.
The green light next to the button illuminates when the syringe pump is in use.
Tip!
Manual Tuning mode.
4500 Series of Instruments
30 of 138
Post. Adjust the height to prevent the syringe plunger from hitting the
syringe during sample infusion.
Post lock screw. Tighten the screw after the height of the post is adjusted.
Turning the Side Screws
The syringe pump can also be started using the Analyst software in
System User Guide
RUO-IDV-05-0264-A
Hide quick links:
Advertisement
Table of Contents
