Peak Review Right-Click Menu; Calibration Curves - AB Sciex QTRAP 4500 LC/MS/MS system System User's Manual

Peak Review Right-Click Menu

Right-click in the Peak Review window or pane to access the following options.
Figure 11-10 Peak Review Right-Click Menu
Menu
Options
Sample Annotation
Save Active to Text File
Show First Page
Show Last Page
Slide Show Peak Review
Update Method
Revert to Method
Delete Pane

Calibration Curves

Use calibration curves to find the calculated concentration of samples, including quality control
(QC) samples. QC samples are added to a batch to estimate the data quality and accuracy of
standards in the batch. QC samples have known analyte concentrations but are treated as
unknowns so that the measured concentrations can be compared to the actual value.
The calibration curve is generated by plotting the concentration of the standard versus its area or
height. If an internal standard is used, the
System User Guide
RUO-IDV-05-0264-A
Function
Opens the Peak Review Options dialog.
Opens the Sample Annotation dialog.
Saves the selected peak as a text file.
Goes to the first sample.
Goes to the last sample.
Opens the slide show.
Updates the algorithm for all peaks.
Selects a redefined peak based on the current quantitation method.
Deletes the active pane.
ratio of the
Operating Instructions — Analyze and Process Quantitative Data
standard concentration/internal standard
4500 Series of Instruments
107 of 138