AB Sciex QTRAP 4500 LC/MS/MS system System User's Manual page 68

Operating Instructions — Batches
Figure 9-4
2. In the Set list, select the set.
3. In the Autosampler list, select the autosampler.
The appropriate number of rack spaces for the autosampler is shown in the graphic
rack display.
4. In the space associated with the rack, right-click and then select the rack type.
The plates or trays are shown in the rack.
5. Double-click one of the rectangles.
The circles depicting the wells or vials for the plate or tray are shown.
6. To select whether samples are marked by row or column, click Row/Column
Selection.
If the button shows a red horizontal line, the Batch Editor marks the samples by
row. If the button shows a red vertical line, the Batch Editor marks the samples by
column.
7. Click the sample wells or vials in the order to be analyzed. Click a selected well or
vial again to clear it.
8. Save the file.
Tip!
first and last vial within a set. To perform multiple injections from the same
vial, hold down the Ctrl key and then click the vial location. The red circle
changes to a green circle.
4500 Series of Instruments
68 of 138
Batch Editor, Locations Tab
To auto fill in the samples, hold down the Shift key and then click the
System User Guide
RUO-IDV-05-0264-A