Table of Contents
Advertisement
4.2
OPERATIONAL COMPONENTS DESCRIPTION (CONT'D.)
Q.
AUTO PUNCH SELECTOR SWITCH: Pressing this button allows the
operator to actuate the punch cycle automatically by placing the paper stack
next to the punch edge guide, or by depressing the foot pedal.
R.
LED DISPLAY WINDOW: Displays a chasing line while machine warms
up, displays the current number of binds up to 99, and counts down the
Debind cycle. Allows technician to set debind time, temperature, and to
check the counter.
S.
MANUAL PUNCH BUTTON: When Auto Punch is not depressed, this
button must be depressed in order to punch the paper stack.
T.
DEBIND BUTTON: Pressing this button places machine in debind mode
for debinding documents.
U.
DEBIND INDICATOR LED: Lights when Debind Selector Switch is
depressed.
V.
>1" (OVER 1") SELECTOR SWITCH: Pressing this button places the
machine in standard bind mode. The standard bind mode is recommended
for documents over 1 inch where maximum binding strength is required.
W.
>1" (OVER 1") INDICATOR LED: Lights when >1" Selector Switch is
depressed.
X.
STANDBY INDICATOR LIGHT: Illuminates after On Button pressed -
indicates machine is in warm-up mode. Goes out when machine is ready.
4.0 OPERATING INSTRUCTIONS
4-4
9781858-02/02
Advertisement
Table of Contents
