Installing Your System - DEC a-Series Installation And Setup Manual

Getting Started

Installing Your System

115V
230V
1–4 Installation and Setup Guide
This section shows the installation and
connection steps for your system.
NOTE: All connectors are keyed with icons on
the back of the system box.
CAUTION: To ensure proper cooling, verify
that air can flow freely into the system front and
out the rear of the system. Position your system
so that air can flow freely to and from the vents,
as shown. Do not block any of the vents,
especially those on the system rear or bottom
front.
To connect system components, follow these
steps:
1. Confirm that the voltage selector switch
matches your local voltage (either 115 Volts
or 230 Volts), as shown.
CAUTION: Improper voltage selection can
damage the system's power supply!