I Dtcs Polarity Setting - Icom IC-R5 Instruction Manual

8
TONE SQUELCH AND POCKET BEEP

I DTCS polarity setting

As well as the code setting, the polarity setting is also avail-
able for the DTCS operation. When a different polarity is set,
the DTCS never releases audio mute even a signal with
matched code number is received.
q Push [TS•SET] for 1 sec. to enter set mode.
w Rotate [DIAL] to select "EXPAND" item.
eWhile pushing [FUNC], rotate [DIAL] to turn the expanded
set mode ON.
rRotate [DIAL] to select "DTCS P" item.
37
[DIAL]
[FUNC]
After 1 sec.
[TS•SET]
tWhile pushing [FUNC], rotate [DIAL] to select the polarity
from normal (NORMAL) and reverse (REV).
Normal polarity
y Push [TS•SET] to exit set mode.
Reverse polarity