Debug Platform Fallback-Bridging - Cisco WS-C3560E-24PD-E Command Reference Manual

debug platform fallback-bridging

debug platform fallback-bridging
Use the debug platform fallback-bridging privileged EXEC command to enable debugging of the
platform-dependent fallback bridging manager. Use the no form of this command to disable debugging.
Syntax Description
error
retry
rpc {events | messages}
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.1(19)EA1
Usage Guidelines If you do not specify a keyword, all fallback bridging manager debug messages appear.
The undebug platform fallback-bridging command is the same as the no debug platform
fallback-bridging command.
Related Commands Command
show debugging
Catalyst 3560 Switch Command Reference
B-36
debug platform fallback-bridging [error | retry | rpc {events | messages}]
no debug platform fallback-bridging [error | retry | rpc {events | messages}]
(Optional) Display fallback bridging manager error condition messages.
(Optional) Display fallback bridging manager retry messages.
(Optional) Display fallback bridging debugging information. The
keywords have these meanings:
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled. For
syntax information, select Cisco IOS Release 12.2 Configuration Guides
and Command References > Cisco IOS Configuration Fundamentals
Configuration Guide, Release 12.2 > System Management >
Troubleshooting and Fault Management.
events—Display remote procedure call (RPC) events.
•
messages—Display RPC messages.
•
Appendix B Catalyst 3560 Switch Debug Commands
78-16405-05