Dlc Configuration For Lan Manager; Dlc Configuration; Terminal Server Configuration; Host Configuration - Black Box 16-Port Rackmount 10/100 Installation Manual

9: DLC Configuration for LAN
Manager
The EZWebCon configuration software is the easiest way to configure the Terminal Server.
This chapter explains DLC/Digital Network Port configuration for Windows NT 4.x hosts.
The Server needs an IP address before you can use EZWebCon. See
Note:
Setting the IP Address on page 20 for instructions.
Printing using an LPD client is the preferred method for sending print jobs to the Terminal
Server. Windows 95 does not support DLC printing (see Chapter 5 for more information).

9.1 DLC Configuration

9.1.1 Terminal Server Configuration

To use the DLC protocol, you must have one service with the DLC characteristic enabled.
The DLC characteristic may be associated with only one service on a given Terminal
Server.
Local>> DEFINE SERVICE LES_xxxxxx DLC ENABLED

9.1.2 Host Configuration

To send print jobs from a Windows NT host to the Terminal Server, add the Terminal
Server as a Windows NT printer.
1
Double-click the Printers icon in the Control Panel.
2 Double-click the Add Printer icon.
3 In the window that appears, select My Computer and click Next.
4
Select the Add Port button.
5
Select Hewlett-Packard Network Port and click New Port.
If Hewlett-Packard port is not one of the available options, you must install DLC
printing from your Windows NT system disks. DLC is not installed by default.
6 Enter the Terminal Server hardware address. It is printed on the Terminal Server bot-
tom label.
Figure 9-1: Enabling DLC
41