Connections to the Digital Connectors
fig.VS-700-rec02-digi-e.eps
Connecting a Digital Audio Source
If you want to digitally connect a DAT or similar device, connect its output connector (e.g., DIGITAL OUT connector) to the VS-700R's DIGITAL IN
connector.
VS-700R Rear Panel
If you're connecting an ADAT device,
connect it to the ADAT connector.
A maximum of eight channels can be input
When connection cables with resistors are used, the volume level of equipment connected to the inputs
(INPUT 1–8 jacks, AUX IN Jack) may be low. If this happens, use connection cables that do not contain resistors.
The DIGITAL 1 coaxial connector and AES/EBU connector
are a mutually exclusive selection. To make your choice, go
to SONAR's "Tools" menu, open " VS-700," select the "MIC
PRE" tab, and make the desired setting in the "DIGITAL 1
INPUT" field.
Using an
Using
a coaxial
AES/EBU
connector
connector
Connecting Recording Equipment
79