Assign Button - Roland Sonar V-Studio VS-700 Owner's Manual

CHANNEL STRIP Section

ASSIGN Button

Use the [ASSIGN] button to change the parameter that's assigned to the rotary encoders of the channel strips. The
available functions vary depending on which [FADER VIEW] button (TRACK, BUS, MAIN or I/O CONTROL) is selected.
fig.8.eps
A
B
A. [ASSIGN] button
B. [FADER VIEW] buttons
C. [I/O CONTROL] button
The following table shows which parameter types are available for each FADER VIEW.
FADER VIEW
TRACK
BUS
MAIN
I/O CONTROL
* When the I/O CONTROL mode, you can switch On/Off of PAD (p. 84) by pressing the rotary encoder.
38
Channel strip ASSIGN
type function1
(default)
Audio Pan
MIDI Pan
Stereo Pan
Surround (Reserved)
Audio (Reserved)
Mic Pre Gain
(audio)
(p. 84)
C
ASSIGN ASSIGN
function2 function3
Send 1 Volume Input
Chorus Send MIDI Channel
Send 1 Volume Send 1 Pan
Send 1 Volume (Reserved)
(Reserved) (Reserved)
Threshold
Attack (p. 85)
(p. 85)
ASSIGN
function4
Output
Output
Output
Output
(Reserved)
Release (p. 85)