Strip Select (Sel) - Roland Sonar V-Studio VS-700 Owner's Manual

CHANNEL STRIP Section

Strip Select (SEL)

Use the [SEL] button to activate the CHANNEL STRIP CONTROL section for the selected channel, which allows you to
control EQ and Send parameters for that channel.
The eight [SEL] buttons are mutually exclusive, so only one channel at a time can be selected. When enabled, the
[SEL] button stays lit.
The modifier buttons (p. 67) can be used to extend the functions as follows.
The [SEL] button is not bi-directional. Changing the current track in SONAR will not change the selected
channel on the VS-700C Console.
Button
Default (no modifier button)
CTRL+SEL
SHIFT+SEL
COMMAND+SEL
fig.4.eps
36
Explanation
Activates the CHANNEL STRIP CONTROL section for the selected channel. Also
sets the current track in SONAR if FADER VIEW is assigned to TRACK.
Enable Plug-in mode. For more information, refer to "Controlling Plug-ins
from the VS-700C Console" (p. 74).
Locks/unlocks the channel strip to the corresponding track/bus in SONAR.
(p. 46)
Toggles a global enable state for locking. If you have strips locked, you can
disable and re-enable locking and the same strips will be locked.