Connecting An Edirol Dv-7Dl (Video Control); Connecting The Edirol Dv-7Dl And Vs-700C; To Enable Video Control - Roland Sonar V-Studio VS-700 Owner's Manual

Connecting an EDIROL DV-7DL (Video Control)

The VS-700C's following controllers can be linked with an EDIROL video editing system such as the EDIROL DV-7DL.
• Audio channels 5–8 and the master fader
• Transport
• Jog/shuttle wheel
• T-bar
• Record/Edit tool section
fig.38.eps

Connecting the EDIROL DV-7DL and VS-700C

Use a USB cable to connect the EDIROL DV-7DL's rear panel USB connector to the VS-700C's rear panel USB
connector.

To Enable Video Control

In the VS-700C's T-bar section, press the [VIDEO CTRL] button.
SONAR's video functionality will not be controlled in VIDEO CTRL mode.
Only the EDIROL video editing system is supported.
168