Record/Edit Section - Roland Sonar V-Studio VS-700 Owner's Manual

RECORD/EDIT Section

In the RECORD/EDIT Section you can perform punch-recording, looping, select clips or edit regions, and insert/move
markers.
fig.38.eps
A. Punch
B. Loop
C. Snap
D. flag (Set IN Point)
E. flag (Set OUT Point)
F. Set
G. Marker
Button
PUNCH
LOOP
SET
SNAP
MARKER
Default function
Enable/disable Auto Punch
recording (button is lit when
enabled)
Enable/disable Loop mode
during playback/recording
(button is lit when enabled)
Sets the Punch or Loop region
to match the selected time
range
Go to previous marker. Press
and hold LEFT FLAG + RIGHT
FLAG to clear the selection.
Go to next marker. Press and
hold LEFT FLAG + RIGHT FLAG
to clear the selection.
Enable/disable Track view
Snap to Grid
Insert marker at current Now
Time; markers can be dropped
during playback and when
the transport is stopped
SHIFT+
Enable PUNCH edit mode
(button flashes in PUNCH edit
mode);
use the LEFT FLAG button to
set the punch in point and use
the RIGHT FLAG button to set
the punch out point
Enable LOOP edit mode
(button flashes in LOOP edit
mode);
use the LEFT FLAG button to
set the loop start point and
use the RIGHT FLAG button to
set the loop end point
(Reserved)
(Reserved)
(Reserved)
(Reserved)
View markers on the LCD
display (see Marker mode LCD
display)
A B C
D E F G
CTRL+ ALT+
Set punch
points to
(Reserved)
selection in
any mode
Set loop
points to
(Reserved)
selection in
any mode
Select clip
under Free Edit
Cursor, and
(Reserved)
maintain
previous
selection
(Reserved) (Reserved)
(Reserved) (Reserved)
(Reserved) (Reserved)
(Reserved) (Reserved)
COMMAND+
Open Record
Options dialog
(Reserved)
Fit to Project
(Reserved)
(Reserved)
Open Snap to
Grid dialog
Open Markers
View in SONAR
71