Roland Sonar V-Studio VS-700 Owner's Manual page 75

To Delete a Plug-in
1.
Make sure Plug-in mode is enabled (refer to "To Enable Plug-in Mode" (p. 74)).
2.
Press the [SOLO] button on the channel strip that corresponds to the plug-in you wish to delete.
You can undo and redo any deleted plug-in. To undo, press the [UNDO] button. To redo, press [SHIFT]+[UNDO]
buttons.
To Bypass a Plug-in
1.
Make sure Plug-in mode is enabled (refer to "To Enable Plug-in Mode" (p. 74)).
2.
Press the [MUTE] button on the channel strip that corresponds to the plug-in you wish to bypass.
For each pair of plug-ins (top and bottom row on the LCD displays), the left channel strip corresponds to the
top plug-in and the right channel strip corresponds to the bottom plug-in.
Controlling Plug-ins from the VS-700C Console
75