Troubleshooting; Problems With The Vs-700R Unit; Problems With The Vs-700C Unit - Roland Sonar V-Studio VS-700 Owner's Manual

Troubleshooting

This chapter lists problems that you might experience while using the VS-700, and how to solve them. For more
about the following problems, which might occur during installation or setup, refer to the "Troubleshooting"
chapter in "Getting Started" (separate document).
• Problems when installing the driver or SONAR
• Problems with the driver
• Problems with SONAR

Problems with the VS-700R Unit

All INPUT indicators are blinking.
The cooling fan has stopped.
Turn off the power, and address the cause of the overheating or damage. Contact a service center listed in the
"Information" leaflet (separate document).

Problems with the VS-700C Unit

Fader touch sensitivity does not respond correctly, or the fader motor operates incorrectly
while you're operating the fader
Adjust the touch sensitivity as described in "Adjusting the Touch Sensitivity of the Faders" (p. 33).
171